Representing the finest in Danish design and engineering, the Lockable Free Standing Outdoor Post Box - Allux 250 is a classic and robust post box with a top spring-loaded flap and front retrieval door. Built to withstand the tough Scandinavian climate, it’s so weatherproof that it comes with an exceptional 12-year manufacturer’s guarantee for rust and corrosion.
This sturdy free standing post box has a Eurolock cam lock to keep your mail secure, but you can change this to a Swedish Ruko lock for even greater protection should you so wish. For total convenience, the holes are already drilled ready for you to mount it on a stand. Our 1007 type stands come in three finishes: black, anthracite grey and galvanised steel. You can also purchase it as wall mounted option here.
Th Lockable Free Standing Outdoor Post Box - Allux 250 is crafted from galvanised steel and finished with a powder coating, with either the flap or the entire front in stainless steel for an eye-catching design that complements numerous styles of architecture. It comes with a two-year EU legal guarantee for complete peace of mind.
FR-2 Stand Installation & Ground Fixing
Please note: the FR-2 stand is designed to be installed into the ground and is not a surface-mounted stand. It does not bolt directly onto paving, concrete or another finished surface.
For a secure installation, the lower section of the stand should be set into the ground, ideally using concrete for maximum stability. The supplied cross bolt is an anchoring bolt rather than a ground-fixing bolt. Once fitted through the base of the stand, it helps prevent the post from being pulled or twisted out of the ground after installation.
For additional anchoring, a suitable piece of reinforcement, such as a metal bar or other corrosion-resistant fixing with a compatible hole or loop, may be secured through or around the anchoring bolt before the concrete is poured. This increases the area held within the concrete and can provide additional resistance against movement or removal.For best results:
- Dig a hole deep and wide enough to provide a stable foundation for the stand.
- Fit the supplied anchoring bolt through the lower section of the FR-2 stand.
- Position the stand vertically and check that it is level.
- For additional security, attach suitable reinforcement to the anchoring bolt if required.
- Fill around the stand with suitable concrete and ensure the post remains level while the concrete sets.
- Allow the concrete to fully cure before fitting or placing load on the letterbox.
Ground conditions vary, so the size and depth of the foundation should be appropriate for the installation location. If you are unsure about the ground conditions or installation method, we recommend seeking advice from a competent installer.
View our complete range of outside post boxes here.