Free Standing Outside Parcel Box For Home - Allux 500

• The Free Standing Parcel Box Large Capacity Allux 500 is elegant but unobtrusive perfect for receiving small parcels and general mail while you’re out and about. Ideal for mounting on a wall or stand either indoors or outdoors, it highlights the best of Danish design and engineering and comes with an outstanding 12-year rust and corrosion guarantee.

Made from galvanised steel with a powder coating, this strong and secure parcel box stands up to anything the weather can throw at it. It has a top letter and parcel opening, with a front retrieval door that comes with a sturdy Eurolock. For extra peace of mind, you have the option of switching this to an ultra-reliable Swedish Ruko lock.

This parcel delivery box holds parcels up to 10.5 x 31 x 17cm, and it comes with pre-drilled holes ready for you to mount on a wall or stand. You’ll also have the reassurance of knowing it comes with a two-year EU legal guarantee.

FR-2 Stand Installation & Ground Fixing

Please note: the FR-2 stand is designed to be installed into the ground and is not a surface-mounted stand. It does not bolt directly onto paving, concrete or another finished surface.

For a secure installation, the lower section of the stand should be set into the ground, ideally using concrete for maximum stability. The supplied cross bolt is an anchoring bolt rather than a ground-fixing bolt. Once fitted through the base of the stand, it helps prevent the post from being pulled or twisted out of the ground after installation.

For additional anchoring, a suitable piece of reinforcement, such as a metal bar or other corrosion-resistant fixing with a compatible hole or loop, may be secured through or around the anchoring bolt before the concrete is poured. This increases the area held within the concrete and can provide additional resistance against movement or removal.For best results:

1. Dig a hole deep and wide enough to provide a stable foundation for the stand.
2. Fit the supplied anchoring bolt through the lower section of the FR-2 stand.
3. Position the stand vertically and check that it is level.
4. For additional security, attach suitable reinforcement to the anchoring bolt if required.
5. Fill around the stand with suitable concrete and ensure the post remains level while the concrete sets.
6. Allow the concrete to fully cure before fitting or placing load on the letterbox.

Ground conditions vary, so the size and depth of the foundation should be appropriate for the installation location. If you are unsure about the ground conditions or installation method, we recommend seeking advice from a competent installer.

This free standing version comes with the FR-2 stand.

View our complete range of parcel post boxes here.